MX-2, MX-3 and
MX-4

_________________________________________________
DATA SHEET

Fount dosing is used to control the pH level of the fountain solution.

The MX-2, MX-3 and MX-4 dosers are available for the Pressmate 2kW,
4kW, 6kW, 8kW and 10kW circulators and can be installed as an
upgrade on existing dampening units.


Doser MX-2:
* Automatic additive doser 1-5%
* Continuous flow of 10 to 40 l/min
* Can be wall mounted and used for multi-dampening unit dosing
* Removable outer cover giving full access for service
* Separate tap feed for sampling fount solution
* Inlet water filter
* Simple set-up and operation


Doser MX-3: - The MX-3 offers the same specifications as the MX-2 except:
* Automatic additive doser 3-10%
* Suitable for dosing alcohol substitute for alcohol free printing


Doser MX-4: - The MX-4 offers the same specifications as the MX-2 except:
* Automatic additive doser 5-20%
* Suitable for dosing alcohol subsitute for alcohol free printing

* Standard voltages shown - other electrical specifications available on request.
* MGE can offer tailored solutions to exactly match customer requirements.

All MGE print equipment is assembled in accordance with ISO9001 Quality Management System and European CE Legislation.

MGE reserve the right to change, improve and/or modify all or any products manufactured and sold by us at anytime; this does not incur any obligation on our part to make like changes to any of our products previously sold.
Voltage
Water Inlet Pressure
Water Inlet Flow
230v +/-15%, 50/60Hz
1 to 6 bar
Additive Dosing:
1 to 5%
Range
Output
10 to 40 l/min
Inlet Water Filter
Weight
Dimensions (HxWxD) mm
350 micron
12 kg

 

435 x 630 x 155
230v +/-15%, 50/60Hz
1 to 4 bar
1 to 6 bar
230v +/-15%, 50/60Hz
5 to 20%
3 to 10%
10 to 40 l/min
350 micron
10 to 30 l/min
12 kg
12 kg
435 x 630 x 155
435 x 630 x 155
10 to 40 l/min
10 to 30 l/min
10 to 40 l/min
MX-2

 

 

MX-3
MX-4
350 micron